Get Adobe Flash player

Solutions For:

FRS 3-D Mounts

3-D Mounting Solutions



3-D Fixed Position Wheelchair Mount                       VideoAssembly Instructions

The FRS 3-D Fixed Position Wheelchair Mount provides a great solution for mounting a ComLink communication device to a wheelchair or scooter. The mount system is very flexible and is available with a variety of frame clamps to allow attachment to just about any imaginable configuration. The ComLink attaches to the mount by sliding the ComLink's Mount Plate into the Device Adapter located on the top of the mount. The ComLink can be easily removed using the Device Adapter which provides a positive lock when mounted.

The Fixed Position Mount allows for 3 positions (in use, exiting, and parked). In addition, for easy transport, the assembly can then be lifted off of the wheelchair for transporting in an automobile.

 


3-D Swing-Away Wheelchair Mount                           VideoAssembly Instructions

The FRS 3-D Swing-Away Wheelchair Mount provides a great solution for mounting a ComLink communication device to a wheelchair or scooter. The mount system is very flexible and is available with a variety of frame clamps to allow attachment to just about any imaginable configuration. The ComLink attaches to the mount by sliding the ComLink's Mount Plate into the Device Adapter located on the top of the mount. The ComLink can be easily removed using the Device Adapter which provides a positive lock when mounted.

The Swing-Away Mechanism allows the mount to rotate out of the way when the user needs to enter or exit the wheelchair. In addition, for easy transport, the assembly can then be lifted off of the wheelchair for transporting in an automobile.


 

3-D Folding Wheelchair Mount                                   

The FRS 3-D Folding Wheelchair Mount provides a great solution for mounting a ComLink communication device to a wheelchair or scooter. The mount system is very flexible and is available with a variety of frame clamps to allow attachment to just about any imaginable configuration. The ComLink attaches to the mount by sliding the ComLink's Mount Plate into the Device Adapter located on the top of the mount. The ComLink can be easily removed using the Device Adapter which provides a positive lock when mounted.

The Fold Down Mechanism allows the mount to fold out of the way when the user needs to enter exit the wheelchair. In addition, for easy transport, after folding the upper tubes, the folded assembly can then be lifted off of the wheelchair for transporting in an automobile.
 

 


X-Base Table Top Mount                                           Video | Assembly Instructions

The X-Base Table Top Mount is a great way to mount your device on a table top. Each leg of the X-base is easily adjustable to accommodate for uneven surfaces by simply loosening the center knob. The device attachment can provide 360 degree rotation and tilt control as well. This base works great with our Enable Eyes™ systems as it is provides vertical adjustments as well.

 

 


Clamp-On Table Top Mount                                                    Assembly Instructions

The Clamp-On Table Top Mount is a great solution for when you need to attach a device securely to a table top surface. The system is lightweight and can easily be taken from class to class in settings such as a school environment. The system works best with hand held ComLink devices.

 

 

 

 


Overbed Table Mount

The Overbed Table Mount provides a great solution for positioning devices so that it can be from a bed, wheelchair, or GERI chair. The mount can be easily adjusted vertically by depressing a small hand actuator and allowing the spring assisted mechanism to lift the entire table surface to the desired location. The ComLink attaches to the table using a u-tube that is sized with a diameter identical to our other mount systems (so you can interchange components if need be). The u-tube can provide both vertical and forward or backward adjustment. In addition, we also offer an extended u-tube that allows the device to be positioned just beyond the front of the table which is great for users laying in the near flat position.

 

 


Rolling Floor Mount                                                    Video | Assembly Instructions

The Rolling Floor Mount is a great solution for positioning ComLink Enable Eyes™ systems. This mount is extremely versatile and uses ratcheting hand knobs for adjustment of the joints. It features four rubberized casters that are lockable so you can maintain a position with out having the unit move in an unwanted direction. For vertical adjustment, it features a telescoping gas-assist column that allows positioning anywhere from 1.5 ft to 6.5 ft while maintaining a safety and stability. The Floor Stand works great for Enable Eyes™ Systems that need to be positioned high for users who are laying on an elevated bed. In addition the Floor Mount features a base wide enough to straddle most chairs for those using a wheelchair or recliner.

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading